 |
 |
 |
 |
 |
 |
 |
Cores for wire ropes
Steel
IWRC (Independent Wire Rope Core)
The main core is an independent wire rope, normally
having the construction 7 x 7.
WSC (Wire Strand Core)
The main core is an independent wire strand, normally
having the same construction as the outer strands of the rope.
Fiber
Fiber cores are standard and comprise of natural fibres
such as sisal, hemp, jute, and cotton. Synthetic fibres such as polyamide,
polyethylene, and polypropylene. Asbestos fibres (heat resistant).
1 Preformed Ropes
In the performing process the wires and strands are given their final helical pitch before being laid up into rope. Ropes made in this way show no tendency to untwist when cut
2 Post formed Ropes
The Rope shall be uniformly made. Free from defects.
When uncoiled under no load the rope shall not be wavy.
Lubrication
Lubrication reduces internal friction of the wires
and strands and protects against corrosion. Grease is applied to all ropes
supplied. If special lubricants are required this must be specifically
stated at time of ordering
Diameter of wire ropes
The diameter of a wire rope is the diameter
of the circle which encloses all of the wires. When measuring wire rope
it is important to take the greatest distance of the outer limits of the
“Crowns” of two opposite strands. A measurement across the
valleys will result in incorrect lower readings
 6 X 7 FC |
 6 X 7 + WSC |
 6 X 12 + 7 FC |
 6 X 19 +IWRC 6 X 19 + WSC |
 6 X 19 +FC |
WIRE ROPE CONSTRUCTION TABLE (CLICK) THE SPECIFICATION |
 6 X 19 Fi + Fc |
 6 X 19 +Fi + IWRC |
 6 X 19 + Se + Fc |
|||
 6 X 19 + Se + IWRC |
 6 X 19 W + FC |
 6 X 19 W + IWRC |
|||
 19 X 7 Non Rotating Wire |
 6 x 24 +7 FC |
 6 X 36 WS + Fc |
 6 X 36 WS +IWRC |
 6 X 37+FC |
6 X37 +IWRC 6X37 + WSC |
Wire Rope Construction
For Mining, Aerial Tram Way, Stay etc.
Construction:
6 Strands
7
Wires Per Strand
1 Fiber Core
6 x 7 + FC
 |
|
|||||
| Rope Dia |
Tolerance |
Standard Weight |
1570 N/mm2 (160 g/mm2) |
1770 N/mm2 (180 Kg/mm2 ) |
||
|
Minimum Breaking Strength of Steel wire rope |
|||||
|
mm |
% |
Kg / m |
|
|
|
|
| 3.0 |
+ 8 |
0.032 |
- |
- |
5.30 |
538 |
| 4.0 |
+7 |
0.057 |
- |
- |
9.40 |
957 |
| 5.0 |
0 |
0.089 |
- |
- |
14.70 |
1500 |
| 6.0 |
+6 |
0.129 |
- |
- |
21.10 |
2150 |
| 7.0 |
0 |
0.175 |
- |
- |
28.70 |
2930 |
| 8.0 |
0.229 |
33.30 |
3400 |
37.60 |
3830 |
|
| 9.0 |
0.289 |
42.30 |
4310 |
47.50 |
4840 |
|
| 10.0 |
0.357 |
52.20 |
5320 |
58.60 |
5980 |
|
| 11.0 |
0.432 |
63.10 |
6430 |
71.00 |
7240 |
|
| 12.0 |
+5 |
0.515 |
75.10 |
7660 |
84.40 |
8610 |
| 13.0 |
0 |
0.604 |
88.10 |
8980 |
99.00 |
10100 |
| 14.0 |
0.701 |
102.00 |
10400 |
114.70 |
11700 |
|
| 16.0 |
0.915 |
133.40 |
13600 |
150.00 |
15300 |
|
| 18.0 |
1.160 |
168.70 |
17200 |
190.20 |
19400 |
|
| 20.0 |
1.430 |
208.90 |
21300 |
234.40 |
23900 |
|
| 22.0 |
1.73 |
252 |
25700 |
285 |
28900 |
|
| 24.0 |
+5 |
2.06 |
300 |
30600 |
339 |
34400 |
| 26.0 |
-0 |
2.42 |
353 |
35900 |
397 |
40400 |
| 28.0 |
2.80 |
409 |
41700 |
461 |
46900 |
|
Wire Rope Construction
For Mining, Aerial Tram Way, Stay etc.
Construction:
6 Strands 7
Wires Per Strand
Wire Strand Core
Nominal Tensile Strength of Wire rope |
||||||
| Dia Rope |
Tolerance |
Standard Weight |
1570 N/mm2 (160Kg/mm2) |
1770 N/mm2 (180 Kg/mm2) |
||
| Minimum Breaking Strength of Steel wire rope |
||||||
|
mm |
% |
Kg / m |
Kn |
KG |
Kn |
KG |
| 3.0 |
+ 8 |
0.035 |
5.70 |
581 |
||
| 4.0 |
+7 |
0.063 |
10.10 |
1030 |
||
| 5.0 |
0 |
0.089 |
15.90 |
1620 |
||
| 6.0 |
+6 |
0.142 |
22.80 |
2320 |
||
| 7.0 |
0 |
1.193 |
31.00 |
3160 |
||
| 8.0 |
0.252 |
36.00 |
3670 |
40.60 |
4140 |
|
| 9.0 |
0.318 |
45.60 |
4650 |
51.30 |
5230 |
|
| 10.0 |
0.393 |
56.40 |
5750 |
63.40 |
6460 |
|
| 11.0 |
0.475 |
68.10 |
6940 |
76.70 |
7820 |
|
| 12.0 |
+5 |
0.567 |
81.10 |
8270 |
91.20 |
9300 |
| 13.0 |
0 |
0.664 |
95.10 |
9700 |
106.90 |
10900 |
| 14.0 |
0.771 |
100.80 |
11200 |
123.60 |
12600 |
|
| 16.0 |
1.010 |
144.20 |
14700 |
161.80 |
16500 |
|
| 18.0 |
1.280 |
182.40 |
18600 |
205.90 |
21000 |
|
| 20.0 |
1.570 |
225.60 |
23000 |
253.00 |
25800 |
|
| 22.0 |
1.90 |
273 |
27800 |
307.00 |
31200 |
|
| 24.0 |
+5 |
2.27 |
324 |
33000 |
366.00 |
37200 |
| 26.0 |
-0 |
2.66 |
381 |
38800 |
429.00 |
43600 |
| 28.0 |
3.08 |
442 |
45000 |
498.00 |
50700 |
|
Wire Rope Construction
For Marine Engineering Purpose
Construction:
6 Strands
12 Wires Per Strand
+ 7 FC
6 x 12 + 7 FC
| Nominal
Tensile Strength of Wire rope |
||||||
| Rope Dia |
Standard Weight |
(150 Kg/ mm) |
(165Kg/ mm) |
|||
| Tolerance in Diameter |
Minimum Breaking Strength of Steel wire rope |
|||||
|
mm |
% |
Kg / m |
Kn |
KG |
Kn |
KG |
| 6.0 |
0.098 |
- |
1200 |
- |
1320 |
|
| 8.0 |
0.175 |
- |
2130 |
- |
2340 |
|
| 10.0 |
+7 |
0.273 |
- |
3330 |
- |
3660 |
| 12.0 |
-0 |
0.393 |
- |
4800 |
- |
5280 |
| 14.0 |
0.535 |
- |
6530 |
- |
7180 |
|
| 16.0 |
0.699 |
- |
8520 |
- |
9370 |
|
| 18.0 |
0.885 |
- |
10800 |
- |
11900 |
|
| 20.0 |
1.09 |
- |
13300 |
- |
14600 |
|
| 24.0 |
1.57 |
- |
19200 |
- |
21120 |
|
| 26.0 |
1.85 |
- |
22500 |
- |
24800 |
|
| 28.0 |
2.14 |
- |
26100 |
- |
28700 |
|
General Information
Wire Rope Construction
For Crane, Hoist and, General Engineering Purpose.
Construction:
6 Strands
7 Wires Per Strand
1 fiber Core
6 x 19 + FC
| Nominal
Tensile Strength of Wire rope |
||||||
| Dia Rope |
Tolerance |
Standard Weight |
1570 N/mm2 (160Kg/mm2) |
1770
N/mm2
(180
Kg/mm2) |
||
| Minimum
Breaking Strength of Steel wire rope |
||||||
| Mm |
% |
Kg / m |
Kn |
KG |
Kn |
KG |
| 6.0 |
+ 8 |
0.125 |
- |
- |
19.60 |
1990 |
| 7.0 |
+7 |
0.170 |
- |
- |
26.70 |
2710 |
| 8.0 |
0 |
0.221 |
30.90 |
3150 |
34.80 |
3540 |
| 9.0 |
+6 |
0.280 |
39.10 |
3980 |
44.10 |
4480 |
| 10.0 |
0 |
0.346 |
48.20 |
4920 |
54.40 |
5530 |
| 11.0 |
0.419 |
58.40 |
5450 |
65.80 |
6690 |
|
| 12.0 |
0.498 |
69.50 |
7080 |
78.30 |
7970 |
|
| 13.0 |
0.585 |
81.50 |
8310 |
91.90 |
9350 |
|
| 14.0 |
0.678 |
94.60 |
9640 |
107.00 |
10800 |
|
| 16.0 |
+5 |
0.886 |
124.00 |
12600 |
139.00 |
14200 |
| 18.0 |
0 |
1.120 |
156.00 |
15900 |
176.00 |
17900 |
| 20.0 |
1.380 |
193.00 |
19700 |
218.00 |
22100 |
|
| 22.0 |
1.670 |
234.0 |
23800 |
263.00 |
26800 |
|
| 24.0 |
1.990 |
278.00 |
28300 |
313.00 |
31900 |
|
| 26.0 |
2.340 |
326.00 |
33200 |
368.00 |
37400 |
|
| 28.0 |
2.710 |
378.00 |
38500 |
426.00 |
43400 |
|
| 32.0 |
0 |
3.54 |
494.00 |
50400 |
557.00 |
56600 |
| 36.0 |
+5 |
4.48 |
625.00 |
63700 |
705.00 |
71700 |
| -0 |
||||||
Wire Rope Construction
For Crane, Hoist and General Engineering Purpose
Construction:
6 Strands
19 Wires Per Strand
6 x 19 + IWRC
Wire Strand Core
6 x 19 + WSC
| Nominal
Tensile Strength of Wire rope |
||||||
| Dia Rope |
Tolerance |
Standard Weight |
1570
N/mm2 (160Kg/mm2) |
1770
N/mm2 (180Kg/mm2) |
||
| Minimum
Breaking Strength
of Steel wire
rope |
||||||
|
mm |
% |
Kg / m |
Kn |
KG |
Kn |
KG |
| 6.0 |
+6 |
0.138 |
- |
- |
21.20 |
2150 |
| 7.0 |
+0 |
0.187 |
- |
- |
28.80 |
2930 |
| 8.0 |
0.243 |
33.30 |
3400 |
37.60 |
3820 |
|
| 9.0 |
0.308 |
42.20 |
4300 |
47.60 |
4840 |
|
| 10.0 |
0.381 |
52.10 |
5310 |
58.80 |
5970 |
|
| 11.0 |
0.461 |
63.10 |
6430 |
71.10 |
7230 |
|
| 12.0 |
0.548 |
75.00 |
7650 |
84.60 |
8610 |
|
| 13.0 |
0.643 |
88.10 |
8970 |
99.30 |
10100 |
|
| 14.0 |
+5 |
0.746 |
102.00 |
10400 |
115.00 |
11700 |
| 16.0 |
0 |
0.974 |
133.00 |
13600 |
150.00 |
15300 |
| 18.0 |
1.230 |
169.00 |
17200 |
190.00 |
19300 |
|
| 20.0 |
1.520 |
208.00 |
21200 |
235.00 |
23900 |
|
| 22.0 |
1.840 |
252.00 |
25700 |
284.00 |
28900 |
|
| 24.0 |
2.190 |
300.00 |
30600 |
338.00 |
34500 |
|
| 26.0 |
2.570 |
352.00 |
35900 |
397.00 |
40400 |
|
| 28.0 |
2.980 |
409.00 |
41600 |
461.00 |
46900 |
|
| 32.0 |
3.90 |
534.00 |
54400 |
602.00 |
61100 |
|
| 36.0 |
+5 -0 |
4.93 |
675.00 |
68800 |
761.00 |
77400 |
Seale Type Construction
For
Oil Well, Crane, Hoist and
General Engineering purpose
6 x 19 Se + Fc
| Rope
Dia |
Tolerance
|
Standard
Weight
|
Nominal Strength
Tensile Of wire rope 1770 N/mm2 (180 kg/mm2) |
|
| Minimum breaking Strength of steel wire rope |
||||
|
mm |
% |
Kg/m |
Kn |
KG |
| 8 |
.238 |
37.5 |
3810 |
|
| 9 |
0.302 |
47.4 |
4830 |
|
| 10 |
0.373 |
58.6 |
5960 |
|
| 11 |
0.451 |
70.0 |
7210 |
|
| 12.0 |
0537 |
84.14 |
8580 |
|
| 13.0 |
+5 |
0.630 |
99.05 |
10100 |
| 14.0 |
0 |
0.730 |
114.74 |
11700 |
| 16.0 |
0.954 |
150.04 |
15300 |
|
| 18.0 |
1.210 |
189.27 |
19300 |
|
| 20.0 |
1.490 |
233.40 |
23800 |
|
| 22.0 |
1.800 |
282.43 |
28800 |
|
| 24.0 |
2.150 |
336.37 |
34300 |
|
| 26.0 |
2.520 |
395.21 |
40300 |
|
| 28.0 |
2.920- |
457.97 |
46700 |
|
For Oil Well, Crane, Hoist
and General Engineering Purpose
| Rope Dia |
Tolerance |
Standard
Weight |
Nominal Strength
Tensile Of wire rope 1770 N/mm2 (180 kg/mm2) |
|
| Minimum
breaking Strength of steel wire rope |
||||
|
mm |
% |
Kg/m |
Kn |
KG |
| 8 |
0.262 |
40.5 |
4110 |
|
| 9 |
.0332 |
51.2 |
5220 |
|
| 10 |
0.410 |
63.30 |
6440 |
|
| 11 |
0.496 |
76.5 |
7090 |
|
| 12.0 |
0.590 |
90.91 |
9270 |
|
| 13.0 |
+5 |
0.693 |
106.89 |
10900 |
| 14.0 |
0 |
0.803 |
123.56 |
12600 |
| 16.0 |
1.050 |
161.81 |
16500 |
|
| 18.0 |
1.330 |
203.98 |
20800 |
|
| 20.0 |
1.640 |
252.03 |
25700 |
|
| 22.0 |
1.980 |
304.99 |
31100 |
|
| 24.0 |
2.370 |
362.85 |
37000 |
|
| 26.0 |
2.770 |
426.59 |
43500 |
|
| 28.0 |
3.210- |
494.26 |
50400 |
|
Warrington Type Construction
For
Oil Well, Crane, Hoist and
General
Engineering Purpose
| Rope Dia | Tolerance |
Standard Weight |
Nominal
Tensile Strength Of wire rope 1570 N/mm2 (160kg/mm2) |
|
| Minimum
breaking Strength
of steel wire rope |
||||
|
mm |
% |
Kg/m |
Kn |
KG |
| 12.0 |
0.537 |
84.16 |
8580 |
|
| 13.0 |
0.630 |
99.05 |
10100 |
|
| 14.0 |
0.730 |
114.74 |
11700 |
|
| 16.0 |
+5 |
0.954 |
150.04 |
15300 |
| 18.0 |
0 |
1.210 |
189.27 |
19300 |
| 20.0 |
1.490 |
233.40 |
23800 |
|
| 22.0 |
1.800 |
282.43 |
28800 |
|
| 24.0 |
2.150 |
336.37 |
34300 |
|
| 26.0 |
2.520 |
395.21 |
40300 |
|
| 28.0 |
2.920 |
457.97 |
46700 |
|
For Oil Well, Crane, Hoist and
General Engineering Purpose
6 x 19 W + IWRC
| Rope
Dia
|
Tolerance |
Standard
Weight |
Nominal
Tensile Strength Of wire rope |
|
| Minimum
breaking Strength
of steel wire rope |
||||
|
mm |
% |
Kg/m |
Kn |
KG |
| 12.0 |
0.591 |
90.91 |
9270 |
|
| 13.0 |
0.693 |
106.89 |
10900 |
|
| 14.0 |
0.803 |
123.56 |
12600 |
|
| 16.0 |
+57 |
1.050 |
161.81 |
16500 |
| 18.0 |
0 |
1.330 |
203.98 |
20800 |
| 20.0 |
1.640 |
252.03 |
25700 |
|
| 22.0 |
1.980 |
304.99 |
31100 |
|
| 24.0 |
2.370 |
362.85 |
37000 |
|
| 26.0 |
2.770 |
426.59 |
43500 |
|
| 28.0 |
3.210 |
494.26 |
50400 |
|
Filler Type Construction
For Oil Well, Crane, Hoist
and General Engineering Purpose
6 x 19 Fi + Fc
For Oil Well, Crane, Hoist
and General Engineering Purpose
6 x 19 Fi + Fc
| Rope
Dia |
Tolerance
|
Standard
Weight |
Nominal
Strength Tensile Of wire rope 1770 N/mm2 (180 kg/mm2) |
|
| Minimum
breaking Strength
of steel wire rope |
||||
| mm |
% |
Kg/m |
Kn |
Kp |
| 12.0 |
0.547 |
85.81 |
8750 |
|
| 13.0 |
0.643 |
101.01 |
10300 |
|
| 14.0 |
0.745 |
116.70 |
11900 |
|
| 16.0 |
+5 |
0.973 |
152.98 |
15600 |
| 18.0 |
0 |
1.230 |
193.19 |
19700 |
| 20.0 |
1.520 |
238.30 |
24300 |
|
| 22.0 |
1.840 |
288.32 |
29400 |
|
| 24.0 |
2.190 |
343.23 |
35000 |
|
| 26.0 |
2.570 |
403.05 |
41100 |
|
| 28.0 |
2.980 |
467.78 |
47700 |
|
| Rope Dia | Tolerance | Standard
Weight |
Nominal
Strength Tensile Of wire rope 1770 N/mm2 (180 kg/mm2) |
|
| Minimum
breaking Strength
of steel wire rope |
||||
| mm |
% |
Kg/m |
Kn |
KG |
| 12.0 |
0.602 |
92.67 |
9450 |
|
| 13.0 |
0.707 |
108.85 |
11100 |
|
| 14.0 |
0.820 |
126.51 |
12900 |
|
| 16.0 |
1.070 |
164.75 |
16800 |
|
| 18.0 |
0 |
1.350 |
208.88 |
21300 |
| 20.0 |
1.670 |
256.93 |
26200 |
|
| 22.0 |
2.020 |
311.85 |
31800 |
|
| 24.0 |
2.410 |
370.69 |
37800 |
|
| 26.0 |
2.830 |
435.42 |
44400 |
|
| 28.0 |
3.280 |
505.04 |
51500 |
|
Wire Rope Construction
For
Crane, and
General Engineering
Purpose
Construction:
| Nominal Tensile
Strength of Wire rope |
||||||
| Rope Dia | Tolerance in Diameter
|
Standard
Weight |
1570 N/mm2
(160Kg/mm2) |
1770 N/mm2
180 Kg/mm2) |
||
| Minimum
Breaking Strength of Steel wire rope |
||||||
mm |
% |
Kg / m |
Kn |
KG |
Kn |
KG |
| 6.0 |
+6 |
0.145 |
- |
- |
20.9 |
2130 |
| 7.0 |
-0 |
0.197 |
- |
- |
28.5 |
2890 |
| 8.0 |
+5 |
0.257 |
33.0 |
3360 |
37.2 |
3780 |
| 9.0 |
-0 |
0.326 |
41.7 |
4250 |
47.0 |
4780 |
| 10.0 |
0.402 |
51.5 |
5250 |
58.1 |
5910 |
|
Wire Rope Construction
For
Crane, Hoist and
Engineering
Purpose
Construction:
6 Strands 36
Wires Per Strand
1 Fiber Core
6 x 36 WS + Fc
| Nominal
Tensile Strength of Wire rope |
||||||
| Rope
Dia |
Tolerance
In Diameter |
Standard
Weight |
1570
N/mm2 (160Kg/mm2) |
1770
N/mm2 (180 Kg/mm2) |
||
| Minimum
Breaking Strength of Steel wire rope |
||||||
mm |
% |
Kg / m |
Kn |
KG |
Kn |
KG |
| 12.0 |
0.547 |
74.4 |
7600 |
84.0 |
8550 |
|
| 13.0 |
+5 |
0.643 |
87.4 |
8920 |
98.3 |
10000 |
| 14.0 |
-0 |
0.745 |
101.0 |
10300 |
114.0 |
11600 |
| 16.0 |
0.973 |
133.0 |
13500 |
149.0 |
16200 |
|
| 18.0 |
1.23 |
168.0 |
17100 |
189.0 |
19200 |
|
| 20.0 |
1.52 |
203.0 |
21100 |
234.0 |
23800 |
|
| 22.0 |
1.84 |
250.0 |
25500 |
282.0 |
28700 |
|
| 24.0 |
2.19 |
298.0 |
30400 |
336.0 |
34200 |
|
| 26.0 |
2.57 |
340.0 |
35700 |
395.0 |
40100 |
|
| 28.0 |
2.98 |
405.0 |
41400 |
458.0 |
46600 |
|
| 32.0 |
3.89 |
530.0 |
54000 |
598.0 |
60800 |
|
| 36.0 |
4.93 |
670.0 |
68400 |
757.0 |
77000 |
|
| 40.0 |
+5 |
6.08 |
828 |
84400 |
934 |
95000 |
| -0 |
||||||
Wire Rope Construction
For
Crane, Hoist and
Engineering Purpose
Construction:
6 Strands
36
Wires Per Strand
Independent Wire Rope Core
| Nominal Tensile Strength of Wire rope | ||||||
| Rope Dia | Tolerance In Diameter | Standard Weight | 1570
N/mm2 (160
Kg/mm2)
|
1770
N/mm2 (180 Kg/mm2) |
||
| Minimum Breaking Strength of Steel wire rope | ||||||
mm |
% |
Kg / m |
Kn |
KG |
Kn |
KG |
| 12.0 |
0.602 |
80.6 |
8210 |
89.9 |
9230 |
|
| 13.0 |
+5 |
0.707 |
94.6 |
9630 |
106.0 |
10800 |
| 14.0 |
-0 |
0.820 |
109.0 |
11200 |
126.0 |
12600 |
| 16.0 |
1.07 |
143.0 |
14600 |
161.0 |
16400 |
|
| 18.0 |
1.35 |
181.0 |
18500 |
204.0 |
20800 |
|
| 20.0 |
1.67 |
201.0 |
22800 |
252.0 |
25600 |
|
| 22.0 |
2.02 |
271.0 |
27600 |
304.0 |
31000 |
|
| 24.0 |
2.41 |
322.0 |
32800 |
363.0 |
36900 |
|
| 26.0 |
2.83 |
378.0 |
38500 |
425.0 |
43300 |
|
| 28.0 |
3.26 |
438.0 |
44700 |
493.0 |
50300 |
|
| 32.0 |
4.28 |
571.0 |
58400 |
644.0 |
65700 |
|
| 36.0 |
5.42 |
724.0 |
73900 |
816.0 |
83100 |
|
| 40.0 |
+5 |
6.69 |
894.0 |
91200 |
983.0 |
103000 |
| -0 |
||||||
Wire Rope Construction
For Crane, Hoist and Engineering Purpose
Construction:
6 Strands
37Wires
Per Strand
Wire Strand Core
6 x 37 + WSC, 6 x
37 + IWRC
| Nominal Tensile
Strength of Wire rope |
||||||
| Rope Dia
|
Tolerance |
Standard Weight
|
1570 N/mm2
(160 Kg/mm2) |
1770 N/mm2
(180 Kg/mm2) |
||
| Minimum Breaking
Strength of Steel wire rope |
||||||
mm |
% |
Kg / m |
Kn |
KG |
Kn |
KG |
| 8.0 |
0.244 |
32.00 |
3260 |
36.00 |
3670 |
|
| 9.0 |
0.308 |
40.50 |
4130 |
45.50 |
4640 |
|
| 10.0 |
0.381 |
49.90 |
5090 |
56.20 |
5330 |
|
| 11.0 |
0.461 |
60.40 |
6160 |
68.00 |
6930 |
|
| 12.0 |
0.548 |
72.00 |
7340 |
80.90 |
8250 |
|
| 13.0 |
0.643 |
84.40 |
8610 |
95.00 |
9690 |
|
| 14.0 |
+5 |
0.746 |
97.90 |
9980 |
109.80 |
11200 |
| 16.0 |
0 |
0.974 |
127.50 |
13000 |
144.20 |
14700 |
| 18.0 |
1.230 |
161.80 |
16500 |
182.40 |
18600 |
|
| 20.0 |
1.520 |
200.10 |
20400 |
224.60 |
22900 |
|
| 22.0 |
1.840 |
242.20 |
24700 |
271.60 |
27700 |
|
| 24.0 |
2.190 |
287.30 |
29300 |
323.60 |
33000 |
|
| 26.0 |
2.570 |
337.30 |
34400 |
379.50 |
38700 |
|
| 28.0 |
2.980 |
391.30 |
39900 |
442.00 |
44900 |
|
| 32.0 |
3.90 |
512.00 |
52200 |
577.00 |
58700 |
|
| 36.0 |
+5 |
4.93 |
648.00 |
66000 |
730.00 |
74300 |
| 40.0 |
-0 |
6.09 |
800.00 |
81500 |
902.00 |
91700 |
Wire Rope Construction
For Crane, Hoist and Engineering Purpose
Construction:
6 Strands 37
Wires Per Strand
1 Fiber Core
6 x 37 + Fc
| Nominal Tensile Strength of Wire rope | ||||||
| Rope
Dia |
Tolerance
|
Standard
Weight |
1570
/mm2 |
1770
N/mm2 (180Kg/mm2) |
||
| Minimum
Breaking Strength of Steel wire rope |
||||||
mm |
% |
Kg / m |
Kn |
KG |
Kn |
KG |
| 8.0 |
0.221 |
29.60 |
3020 |
33.30 |
3400 |
|
| 9.0 |
0.280 |
37.50 |
3820 |
42.20 |
4300 |
|
| 10.0 |
0.346 |
46.30 |
4720 |
52.10 |
5310 |
|
| 11.0 |
0.419 |
56.00 |
5710 |
63.00 |
6420 |
|
| 12.0 |
0.498 |
66.60 |
6790 |
74.90 |
7640 |
|
| 13.0 |
0.585 |
78.20 |
7970 |
88.00 |
8970 |
|
| 14.0 |
+5 |
0.678 |
90.70 |
9250 |
102.0 |
10400 |
| 16.0 |
0 |
0.886 |
118.70 |
12100 |
133.40 |
13600 |
| 18.0 |
1.120 |
150.00 |
15300 |
168.70 |
17200 |
|
| 20.0 |
1.380 |
185.30 |
18900 |
207.90 |
21200 |
|
| 22.0 |
1.670 |
223.60 |
22800 |
252.00 |
25700 |
|
| 24.0 |
1.990 |
266.70 |
27200 |
300.10 |
30600 |
|
| 26.0 |
2.340 |
312.80 |
31900 |
352.10 |
35900 |
|
| 28.0 |
2.710 |
362.80 |
37000 |
408.00 |
41600 |
|
| 32.0 |
3.54 |
474.00 |
48300 |
534.00 |
54300 |
|
| 36.0 |
+5 |
4.48 |
600.00 |
61100 |
676.00 |
68800 |
| 40.0 |
-0 |
5.54 |
741.00 |
75500 |
835.00 |
84900 |
Top
Powered By Soft Virtue Technologies